Step-by-Step Installation Guide for Your New LG Front Control Dishwasher
You have purchased a new LG front control dishwasher and gathered all the necessary tools, such as screwdrivers, an electric drill, gloves, and more. However, you’re unsure about how to begin with the installation process.
Before you begin with no preparation, know that improper installation can cause damage and safety hazards. To ensure a secure installation, read the guide before beginning.
How to Install LG Front Control Dishwasher
Step 1: Prepare Cabinet Opening
Start by measuring the space’s height, width, and depth to ensure it fits the dishwasher’s dimensions. Remove any existing dishwashers or cabinets in the designated area. Make sure the floor underneath is clean and level to provide a stable base for your new appliance.
Use a carpenter’s level to confirm that the floor is even. Ensure that there’s enough space for the water and electrical connections at the back of the dishwasher. Also, check for any obstacles, such as pipes or wires, that might interfere with the installation process.
Step 2: Install Mounting Brackets
With the cabinet opening prepared, it’s time to install the mounting brackets to secure the dishwasher. Position the brackets on the sides of the cabinet opening according to the specific model of the LG front control dishwasher’s instructions. Use a drill to screw the brackets securely into place, ensuring they are level and aligned correctly.
Step 3: Connect Water Supply
Locate the hot water supply valve under the sink and turn it off. After that, connect the water supply line to the inlet valve on the dishwasher. Use a wrench to tighten the connection, ensuring there are no leaks. Once the connection is secure, turn the water supply valve back on and check for any leaks.
Step 4: Connect Drain Hose
Now, move towards connecting the drain hose to ensure proper drainage from the dishwasher. Position the drain hose so that it reaches the drain opening under the sink. Secure the hose using a clamp, ensuring it’s not kinked or twisted, which could impede drainage.
Step 5: Electrical Connection
It’s time to make the electrical connection for your LG front control dishwasher. Locate the nearest electrical outlet and ensure it’s compatible with the dishwasher’s power requirements. Carefully route the power cord to the outlet. Plug the cord into the outlet securely, ensuring no exposed wires or loose connections exist.
Step 6: Secure Dishwasher in Place
Once done, slide the dishwasher into the cabinet opening and ensure its center is aligned. Once in position, use a screwdriver to tighten the mounting brackets, securing the dishwasher to the surrounding cabinets. Double-check that the dishwasher is level and stable before proceeding.
Step 7: Test Run
Before using your LG front control dishwasher, perform a test run to ensure everything is working correctly. Load the dishwasher with a small load of dishes and detergent, then select a cycle and start the machine. Once the cycle is complete, inspect the dishes for cleanliness and ensure there are no issues with the dishwasher’s performance.
Conclusion
Follow this guide for a flawless installation of your new LG front-control dishwasher. Test the dishwasher after installation to ensure optimal performance. If you haven’t purchased one yet, seize the opportunity to get it at a reduced price from Discount Appliance Louisiana and let it take care of your dirty dishes.